| |
Včeraj sem si dol potegnila še Malwarebytes in mi je našlo 820 okuženih datotek!! Ampak Gmail še vedno ne dela. Nekaj sem brala po ostalih forumih. Kaj so to hosts files? Je možno, da je s tem kaj narobe?
Kako se pa ustvari nov uporabniški račun v windows?
|
| |
| |
Nov uporabniški račun narediš podobno kot pri postopku na povezavi http://www.zmaga.com/ucenje.php?t=0&.... (oobrazlioženo za XP, vendar mislim, da se boš znašla).
Čisto možno je, da imaš okužen računalnik. Daj si naloži kak antivirusni program in preveri ponovno računalnik. Primer je lahko Avast, ki ga najdeš na http://www.avast.com/en-eu/index
Hosts datoteka se nahaja na c:\windows\system32\drivers\etc. Znotraj nje boš opazila nekaj podobnega kot na spodnji sliki (datoteko odpreš z beležnico/notepad). Ali imaš podobno kot jaz?
|
| |
| |
Vsebina hosts datoteke:
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
Avast imam različico 6.0.1203
spremenil: NikMan (4.8.2011 ob 10.16.05)
|
| |
| |
Sem ustvarila nov račun, tud tam Gmail ne dela 
|
| |
| |
Sem 99%, da je nekaj z računalnikom. Na drugih računalnikih si že preizkusila in je bilo ok ne?
Odpri http://www.unblockbess.com/ pa poglej, če ti tam odpre spletno strani Gmail (gesla in uporabniškega imena pa ne vpisuj, čeprav je znana stran za preko Proxy, sem osebno dodatno pazljiv).
|
| |
| |
To mi napiše:
Povezava je bila obnovljena
Povezava s strežnikom je bila prekinjena med nalaganjem.
Stran je morda začasno nedosegljiva ali preobremenjena. Poskusite znova
nekoliko pozneje.
Če ne uspete naložiti nobene strani, preverite povezavo svojega računalnika
do interneta.
Če uporabljate posrednik ali požarni zid, se prepričajte, da ima
Firefox dovoljenja za dostop do spleta.
|
| |
| |
1. Poiskusi iti še na svojo "domačo stran" modema. Geslo in uporabniško ime naj bi bilo admin. Poiskusi malo pogledati pod blokirane IP.
2. Poiskusi skriti svoj IP (http://www.hide-my-ip.com/).
|
| |
| |
Hja, kje pa je domača stran modema? Nisem ravno računalničar 
|
| |
| |
Vpiši v brskalnik http://192.168.1.1. Mogoče bo pomagalo, čeprav dvomim, da imaš tam kaj slabo nastavljeno. Nikoli pa se ne ve!
|
| |
Prikazujem 3 od skupno 8 strani |
|
